Quick start and adjustment. 5 minutes heat up time.
Single phase 220-240 V. No compressed air required.
For PVC, melamine, veneer and ABS tapes (included 3D and glass effect).
Possibility to use tapes up to 3 mm thick.
Glue temperature adjustment controlled by microprocessor, which avoids the temperature oscillation.
Motorised pressure gluing roller to ensure the perfect edgebanding from the beginning of the panel.
Gluing roller with polymerization processing which helps to reduce the glue consumption.
Glue pot covered by Teflon® for an easy cleaning and maintenance.
Excellent finishings without adhesive residue due to the double flat scraper.
High performance. Up to 120 m of continue edgebanding with the glue pot content.
|Input power:||3450 W|
|Min. panel thickness:||13 mm|
|Max. panel thickness (for tapes from 0.4 to 2 mm):||50 mm|
|Max. panel thickness (for 3 mm tape):||25 mm|
|Min. panel width:||102 mm|
|Min. panel length:||180 mm|
|Adjustable working temperature:||110°-200°C|
|Working speed:||4 m/min|
|Trimming unit no-load speed||10000/min|
|Trimming bits:||Ø 59, Z4, R2, +10°|
|Voltage (single phase):||220-240 V|
|Dimensions:||1720 x 950 x 1350 mm|
Belt feeder unit
Motorised top and bottom trimming unit with TCT bits r=3 + 10º chamfer
Flat scrapers at both sides of the panel
Front and rear flush cutting
8200300 AS382L Dust collector, equipped with two motors and prepared to work during the trimming cicles automatically.
8545498 Attachment with connectors Ø ext. 38-100 mmFor general dust collection systems with a minimum capacity of 1000 m3/h.