Hot melt portable edgebander. For PVC, ABS, melamine, laminate or veneer tapes, previously cut to the wanted length, on straight, round or shaped panels. Very practical for small manufacturing series due to its easy operation and fast adjustment. The height tape adjustment and panel thickness is very easy and intutive. Equipped with assisted tape feeding and electronic speed control to work at the most convenient speed.
Gluing roller with polymerization processing. Allows to band ABS tapes with 3D and glass effect.
With electronic temperature control the machine is also equipped with a precise control for the glue dosage on the tape.
Glue pot and tape sliding base covered by Teflon® for an easy cleaning and maintenance.
|Input power:||830 W|
|Adjustable working temperature:||120 - 200°C|
|Adjustable working speed:||2, 4, 5, 6 m/min|
|Panel thickness:||10 - 62 mm|
|Tape thickness:||0,4-3 mm|
|Tank capacity:||230 cm3|
Bag of glue 250 gr.
5046764 Auxiliary roller. For banding on difficult places, like corners or concave shapes with a close radius.
5046586 Table MEB250A for stationary operation
5046525 Table MEB250 for stationary operation
5600510 TrimmIng set FR256N
2800000 Hand edge trimmer AU93
2100000 Hand end cutter RC21E
2100600 Hand end cutter RC221R (2 mm)
5245922 Hand end cutter RC321S (3 mm)
5045753 Vacuum table SFV50
5045833 Vacuum table SFV150
5046400 Pneumatic tilting and swivelling clamping system SVN460
Cantspray, silicone free non-adherent spray to avoid the glue to stick on the rollers.
Netspray, a very effective multipurpose cleaner for cleaning rests of glue.
Hot melt glue
2599266 Container of special glue 3 kg
Working temperature: 150-170º C
Good adherence and heat resistance.