The AG98F features a guided tracking system that keeps the tape aligned with the panel throughout the application process. Rubber pressure clamps hold and follow the workpiece, helping the operator maintain stable contact between the edge tape and the panel.

This controlled guidance provides several advantages:

• Consistent tape alignment along the panel edge
• Uniform pressure during adhesive activation and application
• Reduced risk of the tape shifting away from the intended position
• Greater control on custom and non-standard workpieces
• Cleaner results with less corrective finishing

The guided system is especially useful when working manually, where precise tape positioning directly affects the appearance and durability of the finished edge.

Direct Hot Air Activation for Pre-Glued Edge Banding

The AG98F directs hot air toward the adhesive layer on pre-glued edge tape, activating the glue immediately before the material is pressed onto the panel. This eliminates the need for a separate glue pot and simplifies the edge banding process for mobile work and short production runs.

The machine offers two selectable temperature settings:

• Temperature I: 570°F (300°C)
• Temperature II: 1,000°F (525°C)

These two operating levels allow professionals to adapt heat output to different edging materials, adhesive requirements, feed speeds, and working conditions. The correct temperature should always be selected according to the tape manufacturer’s recommendations.

Unlike stationary machines intended primarily for straight components, this portable hot air edgebander can follow circular and shaped pieces. It is suitable for workpieces with an internal radius as small as 20 mm, giving professionals greater freedom when finishing custom furniture and curved components.

Typical applications include:

• Straight furniture and cabinet panels
• Round and curved tabletops
• Shaped shelving and decorative components
• Custom cabinetry
• On-site repairs and edge replacements
• Small production runs and one-off projects

Its compact, hand-held format allows the operator to bring the tool to the workpiece instead of transporting large or already installed components to a stationary edgebanding machine.

Fast Setup for Workshop and On-Site Efficiency

The AG98F can be prepared for operation in less than one minute, helping professionals reduce setup time between tasks. Its direct hot air system avoids glue-pot heating, filling, draining, and cleaning, making the machine particularly efficient for installation work and limited production quantities.

Key workflow benefits include:

• Fast startup for short or urgent jobs
• No separate adhesive application process
• Easy movement between workstations and job sites
• Reduced cleanup compared with glue-pot systems
• Simple adjustment for different panel and tape requirements

The AG98F is engineered for applying most common types of pre-glued edge banding used in professional woodworking.

• PVC: durable edging for furniture and cabinetry
• Polyester: decorative edging for finished panels
• Melamine: practical edging for melamine-faced boards
• Wood veneer: natural wood finishes for furniture and interior components

The selected tape must fall within the machine’s supported dimensions of 0.4 to 1 mm in thickness and a maximum width of 50 mm.

Lightweight Design with Professional Performance

Weighing approximately 6 pounds (2.7 kg), the AG98F is designed for convenient transport and controlled manual operation. Its lightweight construction helps reduce operator fatigue while preserving the stability required for accurate tape application.

The machine’s 1,500 W motor delivers an air volume of 400 liters per minute, providing the heat and airflow needed to activate compatible pre-glued tapes efficiently.

Double-insulated construction contributes to safe professional operation when the machine is used and maintained according to the manufacturer’s instructions.

The AG98F is supplied with a practical trimming system to support the finishing stage after the edge tape has been applied. Removing excess material cleanly helps produce a flush transition between the edge banding and the decorative panel surfaces.

For the best result, allow the adhesive to bond correctly before completing the required end trimming, side trimming, or scraping operations.

Portable Hot Air Edgebanding with Precise Tape Control

The Hand-Held Hot Air Edgebander AG98F (230V) combines portability, rapid setup, direct adhesive activation, and guided tape tracking in a compact professional tool. It is an efficient solution for applying pre-glued PVC, polyester, melamine, and veneer edges to straight, circular, and shaped panels.

Choose the Virutex AG98F for controlled tape alignment, flexible on-site operation, and clean professional edge banding without the complexity of a stationary glue-pot machine.

AG98F Technical Specifications

• Input power: 1,500 W
• Maximum edge banding width: 2 inches (50 mm)
• Minimum edge banding thickness: 0.4 mm
• Maximum edge banding thickness: 1 mm
• Minimum internal radius: 20 mm
• Temperature setting I: 570°F (300°C)
• Temperature setting II: 1,000°F (525°C)
• Air delivery: 400 L/min
• Weight: 6 lb (2.7 kg)
• Electrical protection: Double insulation

Choosing the Right Virutex AG98 Edgebander

The AG98F is the standard portable model for applying pre-glued edge banding up to 1 mm thick. Virutex also offers related versions for applications requiring additional capacity or specialized access:

• AG98R: designed for pre-glued edge banding up to 2 mm thick
• AG98E: includes a lap-banding guide for internal door edges, grooves, and jamb cutouts

Selecting the correct model according to tape thickness, panel geometry, and application type helps ensure more efficient operation and better finishing results.